11
AC-2000
|
8.10/8.11
4.2.5 AC-2000 Plus Low Voltage Wiring (Terminals)
NOTE:
Connect each cable’s shielding wire to the grounding strip. The drawing above is an example
only.
NOTE:
Users employing a CO2 sensor, refer to Appendix: Installing a CO2 sensor.
4.2.6 AC-2000 Plus Communication
AC-2000 Plus is wired to a MUX/Communicator via:
•
an internal communication card (P/N C-AC-2000-C232). Connect the communication wires
shown in Section 4.2.5 directly to the MUX / Communicator
OR
•
an external RCLP card (see MUX / RCLP Wiring page 17, for wiring instructions)
