Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
35
To stop the aroma function or when the machine is not in use for a long time,
take the sponge out of the aroma box and clea
n
it.
Put it back into the machine.
•
CLEANING & MAINTENANCE
Before cleaning, turn off the machine by pressing the Power button, and take out the plug.
Ultrasonic membrane
o
The water quality i
s
too hard in some places. This means the
u
ltrasonic membrane
surface may tend to form limescale easily.
Users
must clean the
u
ltrasonic membrane
with
a
cleaning agent.
o
Add little cleaning agent to the
u
ltrasonic membrane surface (the amount will depend
on the limescale
build
-
up
)
.
Then add water to soak the water tray
fully for 10
to
15
minutes.
o
Clean with
a
brush until the limescale has been removed.
o
Clean twice with water.
o
Don’t clean the
u
ltrasonic membrane with metal or stiff material
s
or scrape it.
This
could damage
it.
Inside water tank
o
Clean the inside of the water tank and the water tray
twice per week,
especially if the
machine is used frequently.
o
Use a
soft cloth to wipe it if the water tank has limescale
build
-
up.
o
If there is any dirt stick
ing
to the tank inside wall, clean
it with a gentle scouring agent,
and then rinse off the scour
ing
completely.
o
Don't add acid, alkaline products or ble
ach
to water tank to avoid damage.
Inside water tray
o
Remove any water from the water tray.
Clean off any limescale with a brush, then
wipe with a damp cloth.
o
Rinse it with water.
o
Don’t pour water directly into the water tray
when cleaning the inside.
o
Don’t use acid scouring agent
to wash the inside of the water tray
to avoid damage
to the
u
ltrasonic membrane.
Outside body and water tank
o
Wipe it with soft cloth, and
use
a gentle scouring agent
if dirty.