background image

2

RT-1080 

AM/FM Stereo Tuner

Cautions

WARNING: There are no user serviceable parts inside. Refer
all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not
expose the unit to moisture or water. Do not allow foreign
objects to get into the enclosure. If the unit is exposed to moisture,
or a foreign object gets into the enclosure, immediately dis-
connect the power cord from the wall. Take the unit to a qualified
service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.
Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the
product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around the
unit. Do not place the unit on a bed, sofa, rug, or similar surface that could
block the ventilation slots. If the component is placed in a bookcase or cabinet,
there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any
other appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage
specified on the rear panel of the unit.

Connect the component to the power outlet only with the supplied power
supply cable or an exact equivalent. Do not modify the supplied cable in
any way. Do not attempt to defeat grounding and/or polarization provi-
sions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at
severe angles, exposed to heat, or damaged in any way.

The power cord should be unplugged from the wall outlet if the unit is to be
left unused for a long period of time.

Immediately stop using the component and have it inspected and/or ser-
viced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support its weight.
Do not place it on a moveable cart that could tip over.

NOTE TO CATV SYSTEM INSTALLER:

 Call the CATV system or antenna

installer’s attention to Article 820-40 of the NEC. This provides guidelines
for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the
pint of cable entry as practical. See installation diagram.

NOTE: 

This equipment has been tested and found to comply with the lim-

its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against interference
in a residential installation. This equipment generates and can radiate ra-
dio frequency energy and, if not installed and used in accordance with the
instructions, may cause interference to radio or TV communications. There
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception,
which can determined by turning the equipment off and on, try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the unit and the television tuner.

• Connect the unit to an AC power outlet on a different electrical circuit.

• Consult your authorized Rotel retailer for assistance.

Summary of Contents for RT-1080













Reviews: