Rotel RDV-1060, Technical Manual

Page: 8 / 19

Procedure of RDV-1060 software upgrade
Before proceed the software Upgrade, prepare the software in CD-R or CD-RW,
and DVD-Audio disc which is contained the “CPPM” code in the disc.
(The file size of software itself is 1.02Mb, so it is difficult to read by RDV-1060
such a small size file, thus you make 20Mb temporary file together to easy to
read)
1. Connect the Power cable and TV monitor to the RDV-1060. Then power RDV-
1060 to ON.
2. Playback the DVD-AUDIO disc which is contained “CPPM” code and run more
than 10sec to confirm the playback on the TV Monitor. Then, take out the disc.
3. Insert the Upgrade software disc and play. Wait until the unit automatically to
STANDBY mode. The reading procedure is READ BANK30.ROM --
Æ
flashing
the “WAITING” 7 times --
Æ
DONE --
Æ
unit to STANDBY mode (TV screen and
FL display is OFF)
4. Press POWER button of front panel to OFF and ON again. The unit read again
Upgrade software and finish. Then, the unit automatically opens the door. Take
out the Upgrade software disc.
5. Playback the DVD-AUDIO disc which is contained “CPPM” code again to
confirm if the unit can playback the DVD-AUDIO disc. Finished.
CAUTION: Do not power off during updating until the unit is in standby mode
automatically. If it is happened, it is never retuned the unit to normal.
To confirm the current software version in the unit:
1. Power ON the unit. OFF by remote unit and ON again. Then, open the door.
2. Press Cursor down, up, right and left. It will be appeared the version display on
TV Monitor. Read the Version Number, issued date, REGION number and PIC
IC version Number. When access the other button, the display will disappear.
Please note: The Upgrade software name is always “BANK30.ROM”. If you
change the file name, the RDV-1060 can not read the Upgrade software. The
Region is included in the Upgrade software file. Make sure the Region code for
your market.