Gebrauchsanweisung ○ Mode d’emploi ○ Istruzioni per l’uso ○ Instruction for use
•
PREPARING THE VACUUM CLEANER
o
Fit the hose on the vacuum cleaner by inserting
the rotating hose connection into the vacuum
cleaner until you hear a click. To remove the hose,
press the button at the side of the hose
connection and pull it out.
o
Assembling the telescope tube and accessories
§
Fit the telescopic tube into the other end of
the hose.
§
Adjust the length of the telescopic tube by pushing
the locking mechanism down and pulling in the
bottom section of the tube to a suitable length. When
parking, shorten the tube as far as possible.
§
Fit the floor brush into the telescope tube.
o
The floor nozzle has two settings. When
cleaning hard surfaces(parquet flooring,
flooring tiles, etc.), the nozzle brushes
should be extended. When cleaning
carpets and mats, the brushes should be
retracted into the nozzle. Press the brush
change button to switch between the two settings.
o
Joint nozzle for radiators, corners, skirtings, etc.
