d
050
28
.f
m
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 0
05-50-00
page 9
January 01/2012
3.1)
Returning engine to service after submerging in water
General note
An engine which has been submerged in water must be inspected,
repaired or overhauled in accordance with the BRP-Powertrain instruc-
tions for continued airworthiness.
Inspection
- Inspect all systems for correct functioning.
NOTE:
Prior to the detailed inspection, all parts should be cleaned and
inspected for corrosion. For accessories (e.g. vacuum pump,
fuel filter etc.) the instructions and specifications of the corre-
sponding manufacturer must be followed.
In most cases an overhaul is necessary, in this regard send the engine
without delay to an authorized ROTAX overhaul facility for inspection.
If an engine was submerged into water, all electrical components (e. g.:
electric fuel pumps, ignition coils, stators, spark plugs, spark plug con-
nectors, electronic modules, sensors, ECU, wiring harness) must be
replaced.
NOTE:
Signs of submerging in water could be discoloration or corro-
sion.
WARNUNG
NOTICE
The engine must be marked clearly “Engine sub-
merged in water“. Define if it was fresh water or salt
water.
Complete inspection of these components:
voltage supply
gearbox
suspension system
fuel system
units of power
ignition system
cylinder unit
cooling system
valve train system
engine management
exhaust system
lubrication system
start system
Summary of Contents for 912 iS Sport
Page 1: ...AIRCRAFT ENGINES ref no MML 912 i part no 898742...
Page 157: ......
Page 158: ...AIRCRAFT ENGINES www cps parts com 800 247 9653...
