4
www.roswellmarine.com
Warnings
• Bolts and screws tend to rattle loose over time due to the vibrations and shaking that
your boat experiences while on the water or in transit. Always check all your speakers are
securely fastened by checking speakers bolts for tightness before using your boat. If any
bolts are found to be loose remove them, apply red threadlock and re-tighten the bolts.
• Never hang off of the speaker under any circumstance.
• Be mindful of the head clearance to prevent head injuries.
• Be aware of your tow rope being sure not to get it wrapped around the speaker or any
other objects.
• These speakers are capable of easily producing sound pressure levels (SPL) in excess
of 100 dB, even in an open air environment like a boat. Sound pressures at or above these
levels can easily cause permanent hearing damage or loss. Be sure to use safe listening
practices and protect your ears.
• Users of these speakers should be mindful of their surroundings as sound travels further
over water.
• Covering your speakers with something removable such as after-market covers during
transit or storage can save you a lot of time cleaning and also protect your speakers from
damage.
ATTENTION
Use and Care.
Before use do an inspection of your speakers, checking for loose hardware. We
recommend keeping a set of Allen keys in your boat. Even with threadlock bolts can still
loosen over time.
NEVER USE CLEANERS ON YOUR SPEAKERS, The R1 Pro is a plastic housing and using
cleaners can ruin the finish of your product. A mild soap and water combination can be
used to remove traveling grime or water spots. Make sure you are using soft cloths to
avoid scratches.
To keep your R1 Pros looking their best, it is recommended to keep the speakers covered
when not in use or when traveling.
