Loop the safety lanyard over the tower next to the
speaker clamp.
3/16”
THREADLOCKER
J
K
L
Insert the internal rotational disk at the desired angle
inside the clamp. The internal disk will rotate through
each position for perfect alignment.
Place the clamp on the speaker neck, apply RED
Loctite to 3 clamp bolts and fasten clamp to speaker.
M
Select the appropriate clamp inserts* for your tower,
for the 2 3/8” clamp inserts use the shorter set screws.
Apply RED Loctite to the two clamp bolts and set screw.
Holding the speaker in the desired position, place the clamp
around the tower tubing and close. Replace hardware and
tighten.
N
O
Note
- To ensure tight fit use the correct plastic clamp inserts
and set screws.
*You will have two sets of clamp inserts and two set screws
remaining after installation. Keep for future use or recycle.
5/16”
x2
x2
With your stereo/amp switched off, plug the Deutsch
connectors into the speakers.
THREADLOCKER
Rotational Disc
x6
2 3/8”
1.9”
TOWER
Rev. 30-Apr-14
Pg. 3/4
If you have any questions please call : 1-855-962-WAKE(9253)
Nighthawk F65
Installation Instructions
