D
Repeat the same procedure as Steps B & C on the middle
bow. Both middle bows are identical and not side specific.
Install all 4 screws on one side of the bow as illustrated
Slide the front bow through the pocket in the front of the canvas. Make sure
the taco fittings are facing towards the canvas (top of bimini when installed).
E
C
Install all 4 screws from the inside of the bow as illustrated to avoid screw contact with the fabric. Using a drill and Phillips
bit, thread the center screws into the center and front bows. Be careful not to strip the head of the screw or the threads in
the aluminum tubing. Debur the heads of the screws if necessary to avoid sharp edges.
#2
Phillips
B
After unwrapping all of the bimini components from the packaging, lay out the 2 front bows and a center tube them on
a drop cloth. Arrange the front bows such that the middle bow hinge is facing upward on both sides. Align the 2 front
bows with the center bow using the appropriate set of holes on the front bows. If you have the
wide
version of the
bimini use holes BB. If you have the
narrow
version of the bimini use holes AA.
(x4)
1.
2.
#2
Phillips
(x4)
3
Area 53 Bimini Install
a
tion Instr
u
ctions
www.roswellmarine.com
BB
Note orientation - Up
AA
AA
BB
Note orientation - Up
AA
BB
BB
AA
