Station 6 Preamplifier and Monitor Controller
8
In the typical studio set-up with a DAW, the 4 signals from the inputs Mic1, Mic2, AUX Line3 and AUX Line4, are sent to
the A/D converter and subsequently to the DAW via the USB link.
The 4 output signals from the DAW are sent to the D/A converter via the USB link, and subsequently sent to the Monitor
and Cue(headphone) outputs. Channel 1 and 2 are sent to Monitor left and right, and channel 3 and 4 are sent to Cue left
and right.
Each of the inputs Mic1 and Mic2 have an Insert Point for use with analog equipment like Equalizers, compressors, filters,
what not. Note that the inserted analog equipment is placed in the signal chain before the A/D and the DAW.
The Line3 and Line3 signals are routed directly to the A/D and the DAW.
The Cue(headphone) outputs receive the signals from a local mixer, which has 4 input sources.
1. The main Cue outputs from the DAW and the D/A
2. The direct feeds from the microphone channels via potentiometers at the front, sourced from the Insert Point Returns.
3. The AUX Cue inputs Left and Right, straight into the mixer and to the Cue(headphones) output.
4. The Talk Back Input from the TB microphone input, controlled by the TB switch and volume potentiometer at the front.
