background image

Charge the battery

ONLY

with the supplied charger.

Batteries are only to be charged under adult supervision.

Always disconnect the charger before wiping down and/or cleaning the ATV.

The charger supplied with the ATV should be regularly examined for damage to the cord,
plug, enclosure and other parts. In the event of such damage, the ATV must not be
charged until it has been repaired or replaced.

Chargers have built-in over-charge protection to prevent the battery from being
overcharged.

Note: If the charger gets warm during regular use, this is a normal response and is no cause
for concern. If your charger does not get warm during use, it does not mean that it is not
working properly.

Ignition Switch / Alarm & Key Fob

Your Rosso eQuad Q can be turned on using

2

different methods.

The ATV can be turned on manually by placing the key into the ignition switch (located on
the right side of the ATV) and turning it to the on position. Once turned on manually, the ATV
can

ONLY

be turned off by manually turning the key back to the off position.

The e Quad Q also features remote start/stop via the included fob. Once the ATV has turned
on remotely it can

ONLY

be turned off with the fob. To turn on the ATV remotely, press

either the “unlock” 

🔓

 or “power” 

 button on your fob. To turn the ATV off, press the

“lock” 

🔒

 button on the fob. To activate the alarm/horn press the 

🔊

 button.

Please note: The fob requires 1x CR2032 battery. (pre-installed)

To replace the fob battery first remove the key ring from the fob, then carefully, with a
small screwdriver, pry off the silver side pieces. Once they are removed the 2 halves of the
black fob body can be separated revealing the interior components and battery slot. Once a
new battery is installed, reassemble the fob in the reverse order.

Battery Level Indicator

The battery level indicator is located on the throttle handle on the right handlebar. The
lights indicate the current battery level (Max 100%, Mid 50%, Min 10%-needs charging) and
are also an easy way to tell if your ATV is turned on. If you turn your ATV off and the lights
do not turn off, it may indicate that it was started with the other method of power up.
(Manual keys vs Remote fob)

10

Summary of Contents for E-QUAD Q


















Reviews: