27
T e c h n o l o g y f o r c l e a n p o n d s
•
The sewage pump (2 .4) automatically starts pumping out the water in the tank (2) .
Notice!
Make sure that the sewage pump (2 .4) does not run without pumping water . As soon as the water has been
pumped out of the tank (2), immediately pull the pump plug (2 .3) out of the socket .
•
Tip out any water remaining in the tank (2) . To do this, open the closure clips (2 .6) on the tank (2) and lift the suction head
(1) off the tank (2) . Make sure that the pump plug (2 .3) does not get into contact with water and dirt .
•
Disconnect the connected drain hose (4) from the C-coupling (4 .1) on the tank (2) by twisting the half-coupling on the
hose side .
•
You can then reassemble the device . Close the closure clips (2 .6) to mount the suction head (1) firmly on the tank (2) .
6.3
How to repair the product
Never attempt to open the device yourself or replace the mains cable (1 .3) . Only have repairs carried out by the manufacturer
(or authorised specialists) . In this case, contact your dealer, service workshop or the manufacturer . Improper repairs can
cause considerable damage for the user . Before reuse, all parts must be correctly assembled . Please also refer to section
1 .5 . If you have any questions, please contact Leonhard Rössle by e-mail (leonhard@roessle .ag) .
7. Disposal
7.1
Disposal of product components
The product must not be disposed of in household waste, but must be sent for separate collection . Old or worn parts
must be disposed of in the most environmentally friendly way possible, e .g . by taking them to an approved recycling
centre . It is your responsibility to take the appliance to an appropriate place for disposal and recycling, thus contributing
to environmental protection . Contact your local authorities for the applicable disposal guidelines and information on the
municipal collection points responsible for you .
7.2
Disposal of packaging restraints
The packaging can be disposed of at your local recycling facilities . By disposing of the packaging waste correctly, you
help to avoid possible hazards to the environment and health . Contact your local authorities for the applicable disposal
guidelines and information on the municipal collection points responsible for you .
8.
Accessories and spare parts oders
8.1
Included accessories
Item name
Manufacturer‘s item no.
FANGO 2000 pond suction cleaner
FAN2000
Suction hose, length 10 m, ø 38 mm
SZ802
Drain hose, length 10 m, ø 38 mm
SZ807
Aluminium telescopic rod 1,2 - 3,6 m
SZ953
Triangular floor suction brush, ø 38 mm
SZ338
Suction nozzle, round, ø 38 mm
SZ601