Installation
AY-Q65 Installation and Programming Manual
11
4.
Installation
4.1
Mounting the AY-Q65
Before starting, select the location to mount the AY-Q65 reader.
This location should be at shoulder height.
1.
Drill holes into the back of the metal according to how you want
to mount the AY-Q65. For US Gang Box installation there are two
hole indicators on the back of the metal cover specifically aligned
for the US Gang Box (see ”A” in Figure 1). For a four-screw
custom installation, there are four indicators on the back (see “B”
in Figure 1).
Figure 1: Drill Holes for AC-Q65 Controller
2.
Route the interface cable from the reader to the controller. A
linear type power supply is recommended.
3.
Screw the AY-Q65 back cover to its mounting location.
4.
Return the front cover of the AY-Q65 to the mounted back plate.
5.
Secure the front cover by using the supplied security screw in the
Installation Kit. An L-Shaped tool is provided for use when
tightening the security screw.