background image

Limited Warranty

 

 

AY-E20 Instruction Manual 

Page 12 

Exclusions and Limitations  

ROSSLARE shall not be responsible or liable for any damage or loss resulting from the 
operation or performance of any Product or any systems in which a Product is 
incorporated. This warranty shall not extend to any ancillary equipment not furnished by 
ROSSLARE, which is attached to or used in conjunction with a Product, nor to any Product 
that is used with any ancillary equipment, which is not furnished by ROSSLARE. 
This warranty does not cover expenses incurred in the transportation, freight cost to the 
repair center, removal or reinstallation of the product, whether or not proven defective.  
Specifically excluded from this warranty are any failures resulting from Customer's 
improper testing, operation, installation, or damage resulting from use of the Product in 
other than its normal and customary manner, or any maintenance, modification, alteration, 
or adjustment or any type of abuse, neglect, accident, misuse,  improper operation, normal 
wear, defects or damage due to lightning or other electrical discharge. This warranty does 
not cover repair or replacement where normal use has exhausted the life of a part or 
instrument, or any modification or abuse of, or tampering with, the Product if Product 
disassembled or repaired in such a manner as to adversely affect performance or prevent 
adequate inspection and testing to verify any warranty claim. 
ROSSLARE does not warrant the installation, maintenance, or service of the Product.  
Service life of the product is dependent upon the care it receives and the conditions under 
which it has to operate.  
In no event shall Rosslare be liable for incidental or consequential damages.  
 

Limited Warranty Terms  

THIS WARRANTY SETS FORTH THE FULL EXTENT OF ROSSLARE ENTERPRISES LTD

.

 AND 

IT

S SUBSIDIARY

'

S WARRANTY

 

THE TERMS OF THIS WARRANTY MAY NOT BE VARIED BY ANY PERSON

,

 WHETHER OR 

NOT PURPORTING TO REPRESENT OR ACT ON BEHALF OF ROSSLARE

.

 

 

THIS LIMITED WARRANTY IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES

.

 ALL OTHER 

WARRANTIES EXPRESSED OR IMPLIED

,

 INCLUDING WITHOUT LIMITATION

,

 IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

,

 ARE 

SPECIFICALLY EXCLUDED

IN NO EVENT SHALL ROSSLARE BE LIABLE FOR DAMAGES IN EXCESS OF THE 

PURCHASE PRICE OF THE PRODUCT

,

 OR FOR ANY OTHER INCIDENTAL

,

 

CONSEQUENTIAL OR SPECIAL DAMAGES

,

 INCLUDING BUT NOT LIMITED TO LOSS OF 

USE

,

 LOSS OF TIME

,

 COMMERCIAL LOSS

,

 INCONVENIENCE

,

 AND LOSS OF PROFITS

,

 

ARISING OUT OF THE INSTALLATION

,

 USE

,

 OR INABILITY TO USE SUCH PRODUCT

,

 TO 

THE FULLEST EXTENT THAT ANY SUCH LOSS OR DAMAGE MAY BE DISCLAIMED BY LAW

THIS WARRANTY SHALL BECOME NULL AND VOID IN THE EVENT OF A VIOLATION OF THE 

PROVISIONS OF THIS LIMITED WARRANTY

 

Summary of Contents for AY-E20

















Reviews: