AY-B9250BT User Guide
38
Network setting in the terminal can be set in Static IP and DHCP.
STATIC
: Set the value as a user wants.
DHCP
: Allocated flexibly. (It can be operated normally when using the router supporting
DHCP.)
If
STATIC
is used, it is used when setting IP, Subnet mark and Gateway address of the
terminal.
The following is the default setting value.
Category
Default Setting Value
Terminal IP
192.168.0.3
SUBNET MASK
255.255.255.0
GATEWAY
192.168.0.1
It can set the address value as follows.
Function Key
Function Explanation
F1
Increase the setting value
F3
Decrease the setting value
F2
Move to left
F4
Move to right
F4 Long
Save the setting value
3.5.4.
Server
When the terminal accesses in server through the network, set the information.
Default setting value is as follows.
Category
Default Setting Value
Server IP
192.168.0.2
Port number
7332
3.6.
OPTION Menu
User menu has the same function as follows.