¡Error! Utilice la ficha Inicio para aplicar TOA Heading al texto que desea que
aparezca aquí.
AC-425 Hardware Installation and User Guide
vii
Notice and Disclaimer
Shis manual’s sole purpose is to assist installers and/or users in the safe and efficient installation and
usage of the system and/or product, and/or software described herein.
B
EFORE ATTEMPTING TO INSTALL AND
/
OR USE THE SYSTEM
,
THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES
.
The system must not be used for purposes other than those for which it was designed.
The use of the software associated with the system and/or product, if applicable, is
subject to the terms of the license provided as part of the purchase documents.
ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’
(hereafter: "Rosslare") exclusive warranty and liability is limited to the warranty and
liability statement provided in an appendix at the end of this document.
This manual describes the maximum configuration of the system with the maximum
number of functions, including future options. Therefore, not all functions described in
this manual may be available in the specific system and/or product configuration you
purchased.
Incorrect operation or installation, or failure of the user to effectively maintain the
system, relieves the manufacturer (and seller) from all or any responsibility for
consequent non-compliance, damage, or injury.
The text, images and graphics contained in the manual are for the purpose of
illustration and reference only.
In no event shall manufacturer be liable for any special, direct, indirect, incidental,
consequential, exemplary, or punitive damages (including, without limitation, any and
all damages from business interruption, loss of profits or revenue, cost of capital or
loss of use of any property or capital or injury).
All graphics in this manual are for reference only, some deviation between the
image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph or graphic of the
PCB(s) are intended for clearer illustration and understanding of the product and may
differ from the actual PCB(s).
