Introduction
AC-225 Hardware Installation and User Guide
Page 3
1.
Introduction
AC-225, AC-225IP and AC-225IPU access control panels are state-of-the-
art networked access controllers, employing the latest technology to
meet the requirements of the market.
When used in combination with Rosslare's AxTrax software system, the AC-
225 gives you full control over access to your premises. The system can
control both single and double door entrances and up to four doors, with
MD-D02 two Door expansion module. AC-225 supports up to 30,000 users
and uses flash memory to enable easy firmware upgrades.
For more information on the AxTrax AS-525 system, refer to the AxTrax
Access Control Software Manual.
The AC-225 consists of the following components:
•
AC-225 controller board
•
Panel enclosure
•
PS-33 power supply
•
Power Transformer (not included with the AC-225IPU)
•
4 x 2.2k Ohm and 4 x 8.2k Ohm resistors for the supervised inputs.
The AC-225IPU also includes on-board support for communications across
a TCP/IP network.
The AC-225U and AC-225IPU are for US installations, and have been
approved by UL for use as a stand-alone unit only.