Ross Vision 4800DR-319-03, Installation Manual

Page: 6 / 12

6 • Touchscreen Display Control Connection
Touchscreen Display Control
Connection
Ross Video does not provide a mounting arm with the Vision control panel.
When selecting a mounting arm, you should consider the environment that the
control panel will be operating in. For example, in a mobile or truck
environment, a more rigid mounting arm is needed to secure the Touchscreen
Display.
Operating Tip
— Ross Video recommends the Humanscale
M7 Desk Mount Flat Panel Monitor Arm by Media Control Co.,
Inc. (mcergo.com).
Use the following procedure to connect the Touchscreen Display to the Vision
control panel (
Figure 1 ):
1.
Secure the Touchscreen Display ( Figure 1 ) to the VESA FDMI
MIS-D 75 or 50, C Mounting Arm using the screws provided with
the mounting arm and position the display as desired.
Figure 1 Control Panel to Touchscreen Display Cable Connections
2.
Connect and secure one end of the DVI Cable to the DVI port on the
back of the Vision control panel ( Figure 2 ).
3. Connect and secure the other end of the DVI Cable to the DVI port on
the Touchscreen Display.
VGA DVI PS1 USB
PREV NEXT
PS2
VESA FDMI
Mounting Holes