Ross SYNERGY 4000DR-003, Operation Manual, Page: 249 / 332

Synergy Series Operation Guide (v18) Memory Functions and More • 8–7
• (Synergy 4 only) Press
MLE 4
to store just the contents of MLE 4 in a selected
memory register. To store MLE 4 plus another MLE, press the desired MLE buttons
simultaneously, e.g.,
MLE 4 + MLE 3 + MLE 2
.
• (Synergy 2 only) Press
MLE 1 RATE
to change transition rates for MLE 1 effects
(in the MLE 1 Transition group). This button is located in the Global Memory
System group because the Synergy 2 does not have an MLE Memory Group .
Refer to the section “ Changing MLE Auto Transition Rates ” on page 5–12 for
instructions.
• (Synergy 2 only) Press
MLE 2 RATE
to change transition rates for MLE 2
(Program/Preset) effects. Refer to the section “ Changing Program/Preset Auto
Transition Rates ” on page 5–11 for details.
• (Synergy 3 only) Press
MLE 3 RATE
to change transition rates for MLE 3
(Program/Preset) effects. Refer to the section “ Changing Program/Preset Auto
Transition Rates ” on page 5–11 for details.
• (Synergy 4 only) Press
MLE 4 RATE
to change transition rates for MLE 4
(Program/Preset) effects. Refer to the section “ Changing Program/Preset Auto
Transition Rates ” on page 5–11 for details.
• (Synergy 2 only) Press
KEY RATE
to change transition rates for both MLE 1 key
groups (the rate is identical). This button is located in the Global Memory System
group because the Synergy 2 does not have an MLE Memory Group . Refer to the
section “ Changing MLE Keyer Rates ” on page 7–46 for details.
• (All Switchers) Press
FADE RATE
to change the switcher’s fade-to-black
transition rate. Refer to the section “ Changing Fade to Black Rates ” on page 4–36
for instructions.
• (All Switchers) Press
DSK RATE
to change the switcher’s downstream key
transition rates. The rate is identical for DSK 1 and DSK 2. Refer to the section
“
Changing DSK Auto Transition Rates ” on page 7–45 for instructions.
5. Remote Section
The Remote Section includes buttons for toggling remote control from external devices.
The group is identical for all switchers.
• Press EDITOR to toggle remote control from an external edit controller. The
Editor Interface Option must be installed. When lit, remote control is enabled (but
local operation can still be performed). When off, the switcher is entirely “local.”
Refer to the section “
Editor Interface ” for details.
• Press
GPI
to toggle remote control from external GPI sources. The button controls
GPI input pulses — output pulses are not affected. When the button is lit, remote
GPI control is enabled. When the button is off, external GPI control is disabled.
Refer to the section “
GPI Control ” for details.
Note The ALL , MLE 1 , MLE 2 , MLE 3 and MLE 4 buttons can also be
used with the buttons in the Recall Section to reset the entire switcher,
or selected MLEs. Refer to the section “ Software Reset ” on page 2–19
for details.
MLE
4
MLE1
RATE
MLE2
RATE
MLE3
RATE
MLE4
RATE
KEY
RATE
FADE
RATE
DSK
RATE
EDITOR
GPI