Ross Synergy 100 MD, Operator'S Manual

Page: 295 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Sequences and Wipes • 17–19
6. Add a Hold to the sequence as follows:
• Use the
ª
and
©
buttons to select
On
.
• Press the right
SEL
button to accept the new settings.
7. Save your sequence as follows:
• Press
SEL/DVE
and
L
OAD
S
EQ
to display the Load/Save Seq. Menu .
Load/Save Seq. Menu
• Use the knobs to select a sequence position in the list.
• Press 1. Save Sequence to save the sequence in that position.
8. For ease of use, you should give each sequence a unique, descriptive name. Refer to the
section “ Renaming a Sequence ” on page 17–21 for information on renaming a
sequence.
This completes the procedure to add a Hold to a sequence.
Note The sequence number in brackets indicates the position of the
sequence in the list.
Use positioner or Hue, Sat, Lum to modify
Load/Save Seq. Key 1
0. Load Sequence
1. Save Sequence
2. Delete Sequence
3. Rename Sequence
SEQ : New Seq (00)
Keyframes: 2
Channels: 0
Duration: 00:01:00
None
New Seq (00)
New Seq (01)
Unused (02)
Unused (03)
Unused (04)
Seq.: