Ross Synergy 100 MD, Operator'S Manual

Page: 249 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Position/Crop Functions • 13–11
Transparency
The Transparency effect allows you to adjust the transparency of the channel image. You can make
the channel image completely opaque (0% Transparency) or completely transparent (100%
Transparency).
Use the following procedure to adjust the transparency of a channel image:
1. Navigate to the Position/Crop Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
2. Press 7. Transp. to display the Transparency Menu .
Position/Crop — Transparency Menu
3. Use the
HUE
knob, or move the Positioner left and right , to adjust the level of
transparency as follows:
• Fully Visible — At
0.0%
transparency the channel image will appear as normal.
• Semi Transparent — As the transparency is adjusted from
0%
to
100%
the
channel image will become more transparent.
• Invisible — At 100% transparency the channel image will not be visible on screen.
This completes the procedure for adjusting the transparency of a channel image.
Note
The Transparency feature is currently only available on Preset Pattern
Keys.
Operating
Tip
You can use the POSN hotkey to display the Position/Crop Menu
directly.
Note If the effect is not On (not yet in use), you must press 7. Transp.
again, to toggle to effect On .
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Transparency: 0.0%
On
Off