Ross Synergy 100 MD, Operator'S Manual

Page: 214 / 402

12–4 • Squeeze & Tease MD Basic Operation Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
• You can move a channel
400.000
full screen widths in either direction on the
Z-Axis
.
You may want to think of the 3D working area as a cube with a defined width (X axis), height
(Y axis), and depth (Z axis).
3D Space
Screen and Channel Location
You can manipulate a channel in different ways within 3D space to achieve creative results.
When working with channels, keep in mind that 3D space extends beyond the visible area of the
screen. Channels can be positioned and manipulated outside of the viewable area to create some
interesting effects.
When viewing your work on a monitor, you may want to picture the 3D space as a cube with the
visible area and the perspective point positioned within it.
The viewpoint is the point in space that the channel is viewed from.
The visible area is the area within 3D space that can be seen from the viewpoint. The following
illustration displays how the visible area extends from the viewpoint .
Working in 3D Space – Top View
Note
The Z-Axis works somewhat differently than the other axes because it
is the equivalent of
250
screen widths in each direction. Channels can
be moved on the Z axis until they become so small they disappear from
view.
X
Z
Y
Visible Area
Channel being manipulated within the
3D space, but outside the visible area
Viewpoint
3D Space
Channel being manipulated
within the visible area