Ross Synergy 100 MD, Operator'S Manual

Page: 207 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Global-Store • 11–25
Global-Store — Select Menu
3. Select the Global-Store channel you want to view the current default still for:
• Press
0. Channel
.
• Use the
ª
or
©
buttons to select the desired channel (
1
-
3
).
• Press the right
SEL
button to accept the new setting.
4. Press
BACK
to display the Global-Store Menu .
5. Press 6. View Default to display the View Default Menu .
Global-Store — View Default Menu
This completes the procedure for viewing the default still for a Global-Store channel.
Capturing Stills
You can capture a still from your Preview output and save it as a still for later use. The image is saved
as
CAPTURE0.TGA , and includes all the information in the Preview output except any preview
overlays.
Note
If you wish to capture more than one still, you must transfer the last
captured image file before capturing the next image because the file is
overwritten each time a capture is performed. Refer to the section
“
Transferring Still Images and Animations ” on page 11-7 for
information on transferring files using a WebDAV connection.
Current directory:/
Select
0. Channel 1
1. Select
2. Rename
3. Delete
4. Up one level
5. Cancel Still
NewDir/
Still1
Still2
Still3
Still4
Global-Store 1
Still1
Number: 53
Size: 1920×1080
Alpha: No
Frames: 1
100
Previous
View Default Global-Store 1
Still3
Number: 34