Ross SRG-4400, User Manual

Page: 56 / 193

5–2 • Menu System SRG-4400 User Manual (Iss. 06)
Menu Screens and Maps
The menus can always be viewed on the front panel LCD display, and optionally “in-vision” in an
“on-screen-display” (OSD) viewable on any pattern output. By default, the
OSD is set On for
each pattern output, but can be independently disabled if desired.
The menus are accessed from the initial start-up (Time) screen by pressing the rotary control. To
return to the Time screen, press the blue escape/back button. If you repeatedly press the blue
button, the LCD display will cycle between the display of time and the display of logo.
Time Screen
In this display of time, the additional status information is:
• Device Name
• GPS/NTP Status
• Current Date
• Current Time
• SRG-4400 IP Address (when connected)
• Lock Status
• Software version number
Logo Screen
In this display of logo, the additional information is:
• Time
• GPS/NTP Status
• Logo
• SRG-4400 IP Address (when connected)
• Lock Status
• Software version number
For both of these screens, the top and bottom lines are animated, cycling between the information
detailed above.
Immediately after re-connection of the Ethernet cable, or a video reference, the respective line
may appear momentarily as: “Ethernet...negotiating” or “
Genlocking............
”
By pressing the rotary control from either of the above screens, you access the top level menu.
This menu gives you access to the five key menus that are used to control and configure the
SRG-4400:
1. Audio menu
2. Video menu
3. Timecode menu
Locked to Video v##
Locked to Video v##