Ross SRA-8901 Series, User Manual

Page: 29 / 40

SRA-8901 Series User Manual (Iss. 02) DashBoard Menus • 4–3
Product Tab
Table 4.2 outlines the read-only information displayed in the Product tab.
Hardware Tab
Table 4.3 outlines the read-only information displayed in the Hardware tab.
Output Status
Channel #
OK (Green) A valid output signal is detected
No Signal (Green)
The output signal is not present. The
Invalid Signal alarm for this channel (in
the Alarms tab) is disabled.
No Signal (Red)
The output signal is not present. The
Invalid Signal alarm (in the Alarms tab)
for this channel is enabled.
Signal Not Locked (Green)
An output signal is present, but not
locked. The Invalid Signal alarm (in the
Alarms tab) is disabled for this output
channel.
Signal Not Locked (Red)
An output signal is present, but not
locked. The Invalid Signal alarm (in the
Alarms tab) is enabled for this output
channel.
Table 4.2 Product Tab Items
Tab Title Item Parameters Description
Product SRA-8901-# Displays the card model
Supplier Ross Video Ltd. Indicates the manufacturer of your card
Board Rev ## Indicates the version of the PCB
Board S/N ###### Indicates the card serial number
Software Rev ##.## Indicates the software version
Daughter
Boards
1
6 Output Indicates if a Daughter Card is installed in
the indicated position on the PCB and
provides the specified connections
None
Table 4.3 Hardware Tab Items
Tab Title Item Parameters Description
Hardware
Voltage (mV) # Supply voltage
Current (mA) #
Current consumption of card in
milliamperes
CPU Headroom # Processing power available
RAM Available # On-board processing memory available
Configuration Bank # Storage count
Uptime (h) #
Displays the number of hours since the
last reboot of the card
Table 4.1 Signal Tab Items
Tab Title Item Parameters Description