SRA-8802 User Manual (Iss. 04)
DashBoard Menus • 4–5
Setup Tab
summarizes the
Setup
options available in DashBoard.
Table 4.4 Setup Menu Items
Menu Title
Item
Parameters
Description
Channel A
Input BNC
# (read-only)
Indicates the BNC on the rear module that
is assigned as the input source
N/C
Indicates that no BNCs are currently used
as inputs
Output BNCs
# (read-only)
Indicates the BNCs on the rear module
that are assigned as the outputs
N/C
Indicates that there are no outputs in this
channel
Enable Failover
a
a.
This information is only available when the SRA-8802 is installed with a 8320AR-300, or 8320AR-306 full rear mod-
ule.
Selected
Channel A will use the Backup input
when the primary input of the channel is
lost. The Backup input signal must be
stable for 3 seconds. Note that the card
returns to the primary input once the
primary input signal is stable for 3
seconds.
Cleared*
Disables this feature
Enable Equalizer
Selected*
Equalizer is always enabled
Cleared
Disables the equalizer and sets the
equalizer in bypass mode
Enable Reclocker
Selected*
Reclocker is always enabled
Cleared
Disables the reclocker and sets the
reclocker in bypass mode
Reclocker Rate
Auto*
Card automatically detects the incoming
data rate
270Mbps
Reclocker is set to 270Mbps
1.5Gbps
Reclocker is set to 1.5Gbps
3.0Gbps
Reclocker is set to 3Gbps
Edit Permission
Unlocked*
All configurable menu options are
editable
Locked
All configurable menu options, except this
one, are locked and are read-only
Factory Defaults
Reset
Resets all editable parameters to the
factory default values
