SRA-8802 User Manual (Iss. 04)
DashBoard Menus • 4–3
Channel A
Input Cable Length
(m)
x (1694A) / y (1855A)
Indicates the approximate cable length
used for the input signal where:
• x represents the Belden 1694A length
• y represents the Belden 1855A length
N/A
One of the following is occurring:
• a valid input source was not detected on
the input BNC
• the Enable Equalizer check box is not
selected in the Setup tab
Backup Input
a
Backup Input
No signal
The backup input signal is not present
SD signal
A valid 270Mbps signal is present for the
backup input
HD signal
A valid 1.485Gbps signal is present for
the backup input
3G signal
A valid 2.97Gbps signal is present for the
backup input
Equalizer bypassed
Backup input signal is present and the
equalizer is bypassed (the Enable
Equalizer check box is not selected in the
Setup tab)
a.
This information is only available when the SRA-8802 is installed with a 8320AR-300, or 8320AR-306 full rear module.
Table 4.1 Signal Tab Items
Tab Title
Item
Parameters
Description
