Ross softGear, User Manual

Page: 58 / 70

58 • DashBoard Interface Overview BAP User Guide (v1.0)
Device Info Tab
Table 11 summarizes the read-only information displayed in the Device Info tab.
Nielsen Watermarker Encoder Interface
The Nielsen Watermarker Encoder interface enables you to configure each available watermark
engine.
Table 10 Dolby RTLL — Config
Item Parameters Description
Bypass Selected Ignores the Real-Time Loudness Leveling
settings
Cleared Applies the Real-Time Loudness Leveling
settings
Dialog Intelligence Selected Select this box when using ATSC A/85
Cleared Clear this box when using EBU R128
Target Loudness
(LKFS)
# Adjusts the Loudness K-weighted Relative
to Full Scale (LKFS) value for the output
signals
Peak Limit (dBTP) # Adjusts the audio loudness level based on
the highest signal level present in the audio
signal
Audio Meters
L An audio meter reports a measured unit in dBFS (decibel full scale)
where 0dBFS is the maximum digital value.
• L represents the left channel
• R represents the right channel
• C represents the center channel
• LFE represents the low frequency effects channel
• Ls represents the left surround channel
• Rs represents the right surround channel
R
C
LFE
Ls
Rs
Table 11 Dolby RTLL — Device Info
Item Parameters Description
Version # Reports the software version of the RTLL
processor service
Dolby Library
Version
#
# Input Buffer
Channels
# Specifies the number of input channels
available to the RTLL processor
Packets Processed # Displays a running count of how many
audio frames have been processed by the
RTLL processor