Ross ROSSPOWER RPPHA200MM Manual Download Page 3

GENERAL SAFETY RULES

WARNING! 

Read all instructions Failure to fol-

low all instructions may result in injury or death.

 

Save These Instructions

1) WORK AREA

a) Keep work area clean and well lit. Cluttered and 

dark areas invite accidents.
b) Do not operate petrol augers in explosive atmos-

pheres, such as in the presence of flammable liquids, 

gases or dust. Petrol augers create sparks which may 

ignite the dust or fumes.
c) Keep children and bystanders away while operat-

ing a petrol auger. Distractions can cause you to lose 

control.

2) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use com-

mon sense when operating a petrol auger.
Do not use a petrol auger while you are tired or under 

the influence of drugs, alcohol or medication. A mo-

ment of inattention while operating petrol augers 

may result in serious personal injury.
b) Use safety equipment. Always wear eye protection. 

Safety equipment such as dust mask, non-skid safety 

shoes, hard hat, or hearing protection used for ap-

propriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch
is in the off position.
d) Remove any adjusting key or wrench before turn-

ing the petrol auger on. A wrench or a key left at-

tached to a rotating part of the petrol augers may 

result in personal injury.
e) Do not overreach. Keep proper footing and balance 

at all times. This enables better control of the petrol 

auger in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from 

moving parts. Loose clothes, jewellery or long hair can 

be caught in moving parts.

4) PETROL AUGER USE AND CARE

a) Do not force the petrol auger. 
b) Do not use the petrol auger if the switch does
not turn it on and off. Any petrol auger that cannot
be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the spark plug before making any 

adjustments, changing accessories, or storing petrol 

augers. Such preventive safety measures reduce the 

risk of starting the petrol auger accidentally.
d) Store idle petrol augers out of the reach of children 

and do not allow persons unfamiliar with the petrol 

auger or these instructions to operate the petrol 

auger. Petrol augers are dangerous in the hands of 

untrained users.
e) Maintain petrol augers. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the petrol augers 

operation. If damaged, have the petrol auger repaired 

before use. Many accidents are caused by poorly
maintained petrol augers.
f) Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.
g) Use the petrol auger, accessories and tool bits 

etc,. in accordance with these instructions and 

in the manner intended for the particular type 

of petrol auger, taking into account the work-

ing conditions and the work to be performed. Use 

of the petrol augers for operations different from 

Summary of Contents for ROSSPOWER RPPHA200MM













Reviews: