10
GETTING STARTED
A
B
Fig 8
C
Before starting check the operation to the
chain brake
The chain brake lever (Fig 8-A) should click between
positions (B) and (C). Leave it in position (C) for
starting.
NOTE:
The brake lever should snap into both posi-
tions. If strong resistance is felt, or lever does not
move into either position, do not use your saw. Take
it immediately to a professional Service Centre for
repair.
Fill The fuel tank (Fig 9 –A) with 25:1 fuel oil mix
Fill The oil tank (Fig 9—B) with chain oil.
NOTE:
Whenever you refill the fuel tank with fuel
you must also top up the level of chain oil in the
chain oil tank.
Fig 9
A
B
STARTING
Fig 10
Push the chain brake lever forward to engage
the chain brake Fig 10
Pull the choke knob full out (Fig 11-A)
Press the primer bulb 3 to 5 times (Fig 11-B)
A
B
Fig 11
