TECHNICAL SPECIFICATIONS
No-Load Speed
Air Consumption
Pad Size
Weight
Working Air Pressure
Air Inlet
10,000rpm
79L/min (2.8cfm)
150mm (6”)
1.8kg (3.96lb)
6.2bar (90psi)
¼” BSP
SPEED ADJUSTMENT
This sander is equipped with a regulator for speed adjustment
ATTACHING SANDING PAD/DUAL ACTION SANDERS
Adhesive backed discs are recommended. To apply the sandpaper, align outside edge and
press self adhesive paper onto the pad. Change sandpaper as needed
SANDING/DUAL ACTION SANDERS
Begin sanding with an abrasive grit coarse enough to remove the high spots and any exces-
sive roughness. Follow with a second sandpaper using a grit one to two ranges finer.
Continue with successively finer grits until the desired finish is obtained. Do not change from
a coarse grit to a very fine grit in one step. In doing so, it is difficult to remove swirl marks that
might have been made by the coarse grit abrasive. Always use the finest grit practical for the
sanding operation.
SPEED ADJUSTMENT
AIR INLET
SANDING PAD
THROTTLE CONTROL
WARNING!: Always wear safety glasses
