Ross PTZ-12G, Quick Start Manual, Page: 2 / 2

Need Help? Our friendly, knowledgeable Ross Video Technical Support sta ff are always available!
• Tel1 613-652-4886; or toll-free 1-844-652-0645 (North America), +800 1005 0100 (International)
• E-mail techsupport@rossvideo.com , or visit our website at www.rossvideo.com
• Contact the ROSS VIDEO | HELP CENTER at https://support.rossvideo.com/hc/en-us
2
7) Access the Camera Web Interface
The web interface enables you to con fi gure camera settings and view camera video, using a web browser.
a) On a computer connected to the same network as the camera, launch a web browser.
b) In the address bar of the web browser,
type the IP address of the camera, and
then press Enter .
The login page of web interface appears:
Tip : You can use the remote control to
view the IP address. Press Menu >
Ethernet > IP Address .
c) Provide the User Name and Password ,
and then click the Login button.
The login page of web interface appears.
Tip : The default User Name is admin .
The default Password is 9999 .
6) Camera Networking
a) Connect all cameras and control systems to the same network.
b) Use the remote control to either turn on DHCP or to assign each
camera a unique IP address:
• To turn on DHCP, select Menu > Ethernet > DHCP > On .
Note : The network must be con fi gured for DHCP.
• To assign an IP address, select Menu > Ethernet > IP Address ,
and then specify the IP address.
Tip : The default IP Address is 192.168.100.100 .
5) Providing Power to the Camera
To power the camera, do one of the
following:
• Connect the provided 12 VDC power
supply unit.
• Using CAT6 network cable, connect the
Ethernet port of the camera to a
network router or hub that supports
Power over Ethernet (PoE).
The camera requires PoE++
(IEEE802.3bt).
Camera
CAT6 Network Cable
Camera Camera Camera
Router
(PoE++ capable)
Control
Computer
Router
(PoE++ capable)
Camera Web Interface