Ross openGear GPI-8941 Series, User Manual

Page: 59 / 92

GPI-8941 Series User Guide (v9.0) DashBoard Menus • 59
Config Tab
Table 15.4 summarizes the sub-tabs available in the Config tab.
Table 15.4 Config Tab Items
Item Parameters Description
Vertical Reference Selection
Reference Input
a
a. This menu is not applicable when using a GPI-8941-I16 or GPI-8941-I32.
Off No reference input signal is supplied to the card
Frame 1* The GPI-8941 card uses the reference signal available
via the
REF 1
port on the openGear frame
Frame 2 The GPI-8941 card uses the reference signal available
via the
REF 2
port on the openGear frame
Reference Type
(read-only) Undefined The reference format is not supported by the card
Off Indicates that a reference signal is either invalid or
unavailable, or the Reference Input menu is set to Off
# Indicates the detected format of the reference signal
Timing Window Setup - Type #
Start Line # Specifies the first line of the timing window for the card.
Refer to
Table 15.5 for a list of default values.
Stop Line # Specifies the first line of the timing window for the card.
Refer to
Table 15.5 for a list of default values.
Fields Both The timing window will be applied to Field 1 and Field
2 (if the reference format is interlaced)
Odd Only The timing window will be applied to Field 1 (if the
reference format is interlaced)
Even Only The timing window will be applied to Field 2 (if the
reference format is interlaced)
N/A This is automatically selected for progressive format
types
Proportioned
Setup Selected Changes done in a field are proportionally applied to the
same column in the other format types. Changes can be
made in any type; it does not have to be done in the
All% type. A field must be changed for the automatic
proportioned changes to be done.
Cleared* Changes in a field will not change other fields.
GPI All
Configuration Selected Enables you to configure all GPI Inputs or Outputs
using the same settings. The cells in the
All row of the
Setup tabs are now editable.
Cleared* Disables this feature.
Edit Permission Unlocked Menu options are unlocked and editable from
DashBoard
Locked All menu items, except this one, are read-only
Factory Defaults Reset Resets all card editable parameters to the factory default
values