Ross openGear GPI-8941 Series, User Manual

Page: 31 / 92

GPI-8941 Series User Guide (v9.0) Reference Cabling • 31
Reference Cabling
The GPI-8941 accepts a black-burst or tri-level sync input from either of the openGear frame
REF
ports. A
reference is needed if vertically timed switching is required.
For More Information on...
• configuring a timing window, refer to the section “ Setting up the Vertical Reference Timing Window ” on
page 39.
• the reference inputs on the openGear frame, refer to its user guide.
Reference Cabling
Connect a reference source to the REF1 or REF 2 BNCs on the openGear frame. Refer to Figure 6.1 for BNC
locations. Ross Video does not supply this cable.
Figure 6.1 Cabling — Reference Input BNCs on the Frame
OGX-FR Series Frame
PS1
100-240V~50-60Hz 600W
CAUTION: RISK OF SHOCK
DO NOT OPEN
!
REF 1
LOOP
REF 2
LOOP
PS2
ETHERNET
100-240V~50-60Hz 600W
CAUTION
RISK OF SHOCK DO NOT OPEN
!
OGX-FR
To Reference Source