Ross openGear GPI-8941 Series, User Manual

Page: 17 / 92

GPI-8941 Series User Guide (v9.0) Hardware Overview • 17
Hardware Overview
This chapter provides an overview of the card-edge controls of the GPI-8941.
Card-edge Controls for the GPI-8941
This section provides information on the jumpers, buttons and LEDs for the GPI-8941. Refer to Figure 3.1 for the
location of the card-edge features.
Figure 3.1 GPI-8941 — Card Control Locations
Bootload Button
This button for factory service in the unlikely event of a complete card failure. Do not press this button unless
instructed to do so by Ross Technical Support personnel.
Control and Monitoring Features
This section provides information on the card-edge LEDs for the card. Refer to Figure 3.2 for the location of the
LEDs and controls.
Figure 3.2 Card-edge Controls
Bootload Button
Daughter Card
Bootload Button
PWR LED
ETH LED
CAN LED
RS485 LED