DRA-8804 User Manual (Iss. 04)
DashBoard Menus • 4–3
Hardware Tab
outlines the read-only information displayed in the
Hardware
tab.
Channel #
Input Cable Length
(m)
x (1694A) / y (1855A)
Indicates the approximate cable length
used for the input signal where:
• x represents the Belden 1694A length
• y represents the Belden 1855A length
N/A
One of the following is occurring:
• a valid input source was not detected on
the input BNC
• the Enable Equalizer check box is not
selected in the Setup tab
a.
If the fields are labeled as Channel A-1 and Channel A-2, the Channel Options menu is set to Single Channel.
Table 4.2 Hardware Tab Items
Tab Title
Item
Parameters
Description
Hardware
HW Status
OK (Green)
The rear module installed with the card is
supported and the card is operating
correctly
Incomp Rear Module (Red)
One of the following is occurring:
• an unsupported rear module is installed
with the card
• the card is installed in the wrong frame
slot (where the card does not align with
the connector on the rear module
Voltage (mV)
#
Supply voltage
Current (mA)
#
Current consumption of card in
milliAmperes
CPU Headroom
#
Processing power available
RAM Available
#
On-board processing memory available
Uptime (h)
#
Displays the number of hours since the
last reboot of the card
Configuration Bank
#
Storage count
Table 4.1 Signal Tab Items
Tab Title
Item
Parameters
Description
