4–2 • DashBoard Menus
DRA-8804 User Manual (Iss. 04)
Status Tabs
This section summarizes the read-only information displayed in the
Status
tabs. The fields in the
Signal
tab vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field. Alarm colors are noted within the tables as text
set in brackets next to the menu parameter name.
Signal Tab
outlines the read-only information displayed in the
Signal
tab.
Table 4.1 Signal Tab Items
Tab Title
Item
Parameters
Description
Channel #
a
Status
OK (Green)
A valid input signal is detected
No input (Red)
Input signal is not present. The Alarm on
Loss of Input for this channel is enabled.
No input (Green)
Input signal is not present. The Alarm on
Loss of Input for this channel is disabled.
Input
No signal
Input signal is not present
<125mB/s signal
A signal detected at less than 125Mbps is
present
<125mB/s signal (backup)
A signal of less than 125Mbps is present
from the backup channel
SD signal
A valid 270Mbps input signal is present
SD signal (backup)
A valid 270Mbps input signal is present
from the backup channel
HD signal
A valid 1.485Gbps input signal is present
HD signal (backup)
A valid 1.485Gbps input signal is present
from the backup channel
3G signal
A valid 2.97Gbps input signal is present
3G signal (backup)
A valid 2.97Gbps input signal is present
from the backup channel
Equalizer bypassed
Input signal is present and the equalizer is
bypassed (the Enable Equalizer check
box is not selected in the Setup tab)
Output
Locked - 270M
Reclocker locks at 270Mbps data rate
Locked - 1.5G
Reclocker locks at 1.485Gbps data rate
Locked - 3.0G
Reclocker locks at 2.97Gbps data rate
Unlocked (muted)
Reclocker is enabled and unlocked. The
output is automatically muted
Reclocker bypassed
The reclocker is bypassed (the Enable
Reclocker box is cleared in the Setup tab)
No signal (muted)
Input signal is not present and the output
is automatically muted
