Ross openGear ADA-8402-A, User Manual

Page: 19 / 36

ADA-8402-B User Manual (Iss. 04) Installation • 2–5
Cabling for the ADA-8402-B
This section provides information for connecting cables to the installed rear modules on the
openGear frames. Connect the input and output cables according to the following sections. The
input is internally terminated in 110ohm and it is not necessary to terminate unused outputs.
DFR-8310 Series Frame Cabling Overview
The ADA-8402-B is used with the following rear modules:
• 8310AR-042 Full Rear Module — Each rear module occupies one slot and
accommodates one card. This rear module provides one AES input and eight AES
outputs. (
Figure 2.2 )
DFR-8321 and OG3-FR Series Frame Cabling Overview
The ADA-8402-B is used with the following rear modules:
• 8320AR-042 Full Rear Module — Each rear module occupies two slots and
accommodates one card. This rear module provides one AES input and eight AES
outputs. (
Figure 2.2 )
• 8320AR-043 Split Rear Module — Each rear module occupies two slots and
accommodates two cards. This rear module provides one AES input and four outputs per
card. (
Figure 2.3 )
Figure 2.2 Cable Connections for the
8310AR-042 and 8320AR-042 Rear Modules
Figure 2.3 Cable Connections for the
8320AR-043 Split Rear Module