NK-VRC User Guide (v05)
Setting Up the NK-VRC • 31
Setting Up the Log for Diagnostics
The
Log
tab captures T-Bus events for diagnostic purposes.
Figure 4.12 Log tab
The
Log Enabled
option will enable/disable the log feature. This should be left disabled unless directed by Tech
Support.
Setting Up Carbonite eXtreme Compatibility
Use the
Compatibility
tab to configure the Carbonite eXtreme compatibility settings.
To configure the Carbonite eXtreme compatibility settings
1. In
DashBoard
, open the NK-VRC interface.
2. Select the
Compatibility
tab.
3. In the
Startup Delay (s)
field, enter an amount of time in seconds that the NK-VRC will wait before refreshing
the connected routers to its known status on startup.
This allows the Carbonite eXtreme enough time to boot before the NK-VRC sends refresh switch requests.
Recommended settings are:
• 0 seconds for non-Carbonite eXtreme systems.
• 120 seconds for Carbonite eXtreme systems.
4. Select the
Switch Retries Enabled
check box to retry switch requests when a switch response has not been
received.
If selected, enter an amount of time in milliseconds in the
Switch Retry Delay (ms)
field that the NK-VRC
will expect a response.
The recommended settings for non-Carbonite eXtreme systems are:
•
Switch Retries Enabled
: disabled
•
Switch Retry Delay
: 20 milliseconds
