Ross NK-RP1 Series, User Manual

Page: 28 / 28

28 • Making Custom Cables NK-RP1 Series User Guide (v2.0)
Figure 6.3 Open Female DB9 Connector
Making an NK-S12/P Cable
To make a custom NK-S12/P cable, a Neutrik NL4FX connector and a 2-conductor cable (minimum size of 20
AWG) are required.
To make a custom NK-S12/P cable
1. Attach one end of the cable to the open Phoenix connector.
a. Attach one wire to the ground ( Figure 6.4 ).
b. Attach the other wire to the positive contact ( Figure 6.4 ).
Figure 6.4 Open NK-S12/P Phoenix Connector Backshell with Terminal Block
2. Attach the other end of the cable to the open Neutrik NL4FX connector.
a. Attach the wire on the positive contact of the Phoenix connector to the +1 contact on the Neutrik NL4FX
connector ( Figure 6.5 ).
b. Attach the wire on the ground of the Phoenix connector to the -1 contact on the Neutrik NL4FX connector
( Figure 6.5 ).
Figure 6.5 Open Female DB9 Connector
1+
1-
2+
2-