RCP-NKM User Guide (v3.0)
Setting Up the RCP-NKM • 4–23
The folder and any saved documents may now be accessed via the
File Explorer
pane.
Opening a Saved Document
To open a saved document
1.
In the
File Explorer
pane, navigate to the saved configuration document that you want to open.
2.
Double-click the icon for the document.
Sending a Document to a Device
When you have made changes to the configuration of a device, the changes are not activated in the device until the
document containing the changes is sent to the device. You can open a saved configuration document, make
changes to it, save it, then send it to a device.
To send the current document to a device
1.
Click
Send Configuration
(located on the lower Device Configuration pane).
• The
Send Config to NK Device
dialog automatically selects configuration pages with changed values for
sending. You may select all tables by checking the
Select Pages
if desired.
• The
Send Config to NK Device
dialog also lists similar devices within your routing system network. Smart
Paste is automatically selected for devices that are of a similar type but not directly related to the current
configuration document. This ensures only compatible data will be sent to other devices.
• Any of the pages containing information that has been changed are automatically selected for sending to the
device.
2.
Select the pages that you want to send to the device. Use the information
as a guide.
3.
Select the device to which you want to send the current document from the
Select Devices
list.
4.
Click
OK
.
5.
In the
IPS Explorer
pane, right-click on the device, then select
Reload This Device
.
Printing Labels for the Front of the RCP-NKM
To print and install labels for the keys on the RCP-NKM
1.
Open the RCP-NK1_Label_entry.pdf template from the Ross Video website.
2.
Enter the labels directly onto the corresponding keys, then update the label set as required.
3.
Print the labels onto an overhead transparency sheet following the directions provided in the template.
Table 4.9 Page Descriptions
Page
Description
Home
The information contained in the
Device Details
frame and the
Configuration
tab.
Key Definitions
The information defining how keys have been assigned.
Menu Details
The information contained on the
Menu Details
tab.
Labels
The information contained in the combined pool of input and output labels.
Input Assign
The information contained on the
Input Assigns
tab.
Output Assign
The information contained on the
Output Assigns
tab.
Summary of Contents for NK RCP-NKM
