4.0 Product Features
Please find details of the Ross Digital Indoor Loop Aerial features below:
• Built-in LTE/4G filters to avoid interference from 4G mobile phone signals
• Receives full HD television, digital signals and DAB radio programs: for reception of local and
regional UHF and VHF signals as well as FM radio signals
• Adjustable wide band amplifier for the best picture and sound reception
• Signal clear technology with extremely low noise and high gain circuitry
• Adjustable loop aerial for the best UHF reception
• Telescopic dipoles for best VHF and FM reception
• On/Off switch for energy saving
• Ultra slim design
• Attractive “piano” Black finish
5.0 Installation
The Ross Digital Indoor Loop Aerial is quick and easy to install please follow the below instructions
1.
Power Connection
Connect the coaxial cable to the TV’s RF input socket
2. Connect the aerial to the TV
Connect the AC adaptor to the DC12V/50mA jack
at the back of the aerial and plug the AC adaptor
into a standard AV outlet
1.2 General Information
• Thank you for choosing the Ross Digital Indoor Loop Aerial – 4G. Treated with care and used
in accordance with the contents of this manual it will provide many years of reliable service
•
This symbol indicates that, at the end of its useful life, this product must not be
disposed of with normal domestic waste. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please recycle it responsibly.
•
This product conforms to all applicable EU legislation for this type of product. Further
information can be obtained from Ross if required.
• Please note in order to receive digital TV signals you will require a digital box of some
description.
2.0 In the Box:
Please open your box carefully and check the contents which should be as the list below: If
anything is missing please contact the Ross helpline or return the product to the point of
purchase.
• Aerial
• Power supply
3.0 Product Specifications
Please find the detailed specifications for Ross Digital Indoor Loop Aerial below:
• Reception Channels: 2-12, 21-60
• Frequency: VHF: 47-230MHz UHF: 470-790MHz
• Max Noise Figure: 1.5/1.8dB (VHF/UHF)
• VSWR (Voltage Standing Wave Ratio) <2.5
• Max Output Level: 90dBµV
• 3dB Beam Width: ±24˚/ ±26˚ (VHF/UHF)
• Input Voltage: AC 230V ~ 50Hz
• Working Voltage: DC12V/50mA
• Impedance (Ω): 75
• Connector: IEC-Connector
