19
[3] TP EDIT
Press the YELLOW button “PAUSE” to edit the current
TP. Choose the current TP number by “VOL-” or
“VOL+” buttons, then input the frequency value and
symbol rate value by numeric key, choose the correct
Polarization, Horizontal or Vertical then save and exit.
[4] DELETE TP
Press the BLUE button “TV/RADIO”, to delete the
current selected TP.
6.3 Motor Confi guration (DiSEqC1.2)
This section is used to set up the auto Satellite Dish (DiSEqC1.2 system) location system.
•
Satellite Name / Transponder:
Choose a satellite
or a TP in the same way as previously described.
•
Continuously Move:
Using the ”VOL-” and “VOL+”
buttons select West or East movement of the dish,
use the signal strength and quality bars at the bottom
of the screen to judge the best position for the dish.
•
Move steps:
Dish moves step by step, adjust the
dish to East or West for the best position.
•
Step Size:
Adjust the Move Step size in increments from 1 to 10.
•
Limit set:
Using “VOL-/+” buttons to
fi
x East or West limits or disable movement limits.
•
Reference position:
Set the original position for the satellite receiver dish.
6.4 USALS (DiSEqC) Set-Up
This Menu is used to setup the USALS system on your
set top box.
If you have a USALS motorized system, you must set
your position (latitude and longitude) in order to calculate
all motor positions for viewable satellites. You should
refer to the motor’s manual to get more information.
•
User Latitude:
Enter your Latitude using the numerical keys.
•
North / South:
Default is NORTH for UK