Ross GearLite TSC-9902, User Manual, Page: 17 / 26

TSC-9902 User Guide (v5.0) Physical Installation • 17
Non-Slip Pads
Four non-slip adhesive pads have been supplied for desktop placements. Simply remove the protective backing film
from the adhesive and affix one non-slip pad to each of the four corners on the bottom of the chassis.
Optional Mounting Accessories
Ross Video is committed to providing practical solutions for the needs of your high-quality broadcast facility. The
following products may be ordered separately to expand your installation options.
BPM-9000
The BPM-9000 Angle Mounting Bracket ( Figure 4.3 ) allows a single GearLite module to be installed in positions
not possible with the flat metal plate. The bracket has a 90° angle.

Mounting screws are not provided by Ross Video.
Figure 4.3 BPM-9000 90° Mounting Bracket