Ross GearLite TSC-9902, User Manual, Page: 20 / 26

20 • Cabling TSC-9902 User Guide (v5.0)
Power Adapter and Supply
Connect the PS-9000 power adapter to the power supply connector. The PS-9000 provides reg5V DC (5%)
@ up to 2A. The DC power cord has a locking connector that securely fastens into the power supply DC jack on the
TSC-9902. The TSC-9902 has a standard miniature power jack (center pin positive).
To connect the TSC-9902 to the PS-9000
1. Connect the female end of the provided PS-9000 cable into the socket marked POWER on the TSC-9902
chassis.
Figure 5.2 TSC-9902 — Power Connection
2. Connect the PS-9000 to Mains Power.
Table 5.1 Production Switcher Port Pinouts
Pin
CrossOver Solo Carbonite Black Solo
EDITOR Port Signal SERIAL Port Signal
1 n/c Tx+
2 Tx- Tx-
3 Rx+ Rx+
4 Ground n/c
5 Ground n/c
6 n/c Rx-
7 Tx+ Ground
8 Rx- Ground
9 n/c --
Caution
— Use of improper adapters may damage the TSC-9902 and will void the warranty.
POWER
LTC
SERIAL RX
SERIAL TX
DIFF
RECEIVER
MICRO
TSC-9902
L
T
C to Serial Converter
Note:
It is recommended that you always connect the PS-9000
to the TSC-9902 before connecting to Mains Power.
PS-9000