Ross GearLite CMA-9011, User Manual

Page: 16 / 24

15 • Setup (Iss. 05)
Figure 6 CMA-9011 — DIP Switches
Figure 6 shows all switches in the default UP (

) position. The DIP switches
are numbered 1-8 starting at the left of the block. The top of the CMA-9011
chassis includes a label that provides a condensed DIP switch settings chart.
This chart is intended as a quick reference guide.
Note
— SW1-7 and SW1-8 are not implemented and should be left in
their default UP (

) position.
Table 1 outlines how to set SW1-1 to SW1-6 . The following conventions are
used:

Set the DIP switch in the UP position

Set the DIP Switch in the DOWN position
Table 1 DIP Switch Positions
Video Standard Chroma VI Setup Mode
Setting
Selections
SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6
 
NTSC (525)
 
PAL-N (625)
 
PAL-B/G (625)

Chroma On

Chroma Off

Pass VI

Blank VI

Setup On

Setup Off

Normal Mode

Color Bars
DIP Switches
1 3 4 2 5 6 7 8
ON