9 • Installation (Iss. 02)
Flat Metal Plate
Use the flat metal plate for permanent mounting to a rack, a desk, or any other
location where bolts or screws can be applied. Be sure to position the module to
allow for operator adjustments, if required.
To install the Flat Metal Plate
1.
Remove the
2
screws from the bottom of the chassis.
2.
Install the
Flat Metal Plate
onto the bottom of the chassis (
)
using the screws provided in the Mounting Kit. Do not use the screws
removed during
Step
Figure 3
Flat Metal Plate Installation Option
3.
Install the chassis in the desired location using the
Mounting Holes
on the
Flat Metal Plate
. Mounting screws are not provided by Ross
Video.
Angle Mounting Bracket
The Angle Mounting Bracket (
) allows a single GearLite module to be
installed in positions not possible with the flat metal plate. The bracket has a 90°
angle. Mounting screws are not provided by Ross Video.
