LED
Display
See Table Legend
for symbol
meanings
Function
Selection
Switch
Position
Function
Menu
Up/Down Buttons
Mode Selection Menu
See Table Legend for symbol meanings
Down
(yellow)
Up
(yellow)
3-6
•
Setup and Operation
DAC-9213-PVM User Manual (Iss. 02B)
B
N/A
C
N/A
D
N/A
E
N/A
F
Default Set
(See Function
Menu Notes)
Reset All User Settings to
Factory Default state (Unity)
+(h)
See Notes
Function Menu Notes
Some of the menu items in the Function Setup and Configuration Table are
explained here in further detail as follows:
Operation
In this menu position, the Down and Up buttons are disabled.
Input Video Standard
Use this menu item to select the video standard that matches the incoming SDI
signal's video standard.
In Auto Detect mode, the module will attempt to detect any of the supported
incoming High Definition or Standard Definition SDI video standards. See
Table 2 for supported standards. When a supported standard is detected, the
appropriate analog output format is selected. If the module is unable to
determine the input standard, the Status LED will flash and the module will
mute the analog outputs.
Note
If Disable Auto Mute = On with an input/output mismatch,
the DAC-9213-PVM will output an invalid analog signal and
the Status LED will flash.
Output Video Format
Use this menu to select the output component video format. Please note that
not all output formats support all SDI input signal standards. For example,
RGB (NTSC Related) is only supported on 525i.
See Table 3 for a complete list of supported formats vs. input standards.