Ross Carbonite Black Series, Operation Manual, Page: 49 / 64

Menu
Item
Description
GPO selects the GPI output that you want to trigger
by a media transition
GPOFr selects the time, in frames, from the start of the
media transition that the GPI output is triggered
Mute selects whether the associated audio is turned
on or off during playback
To Set Media-Store File Attributes
The attributes that you can set depend on whether the
file you are setting them for is a still or animation.
1. Insert your USB drive into the USB Port on the
switcher. You must wait 5 seconds for the switcher
to recognise the USB drive. If you are loading a
file from the internal cache, you do not need the
USB drive.
2. Press the source button for the Media-Store
channel that you want to load a still into. If the
file has an alpha, the paired channel will load the
alpha as well.
3. Press NEXT .
4. Use the Attrib knob to select the attribute you
want to set, and the Value knob to select the value
you want to assign to the attribute.
•
X Pos — selects the horizontal position of the
image or animation
• Y Pos — selects the vertical position of the
image or animation
•
Shaped — selects shaped or unshaped for the
alpha of the image or animation
•
Looping — selects whether the animation
loops automatically or not
• Reverse — selects whether the animation
plays in reverse or not
• AutoPly — selects whether the animation
starts playing automatically when taken on-air
or not
• Speed — selects the speed that an animation
plays at (0.1-10)
•
Media X — selects the media number that you
want to use to recall the still or animation
• CutFr
— selects the point, in frames, from
the start of the animation that the background
transition occurs
• GPO — selects the GPI output that you want
to trigger by a media transition
• GPOFr — selects the time, in frames, from
the start of the media transition that the GPI
output is triggered
•
Mute — selects whether the associated audio
is turned on or off during playback
5. Use the Func knob to select how you want to
save the attributes.
•
Save — saves the adjustments for the selected
Attrib value only
•
SavAll — saves the adjustments for all Attrib
values
• Revert
— undoes the adjustments for the
selected Attrib value only
•
RevAll — undoes the adjustments for all
Attrib values
6. Press the Func knob to make the selection.
To Lock a Media Number Place and Bank
Locking the Media Number Place and Bank means
that you do not have to enter them when loading a still.
Lock setting are specific to the channel they are set on.
1. Press the source button for the Media-Store
channel that you want to set the Place and Bank
lock settings for.
2. Press the Browse knob.
Carbonite Black Operation Manual (v14.0) — Media-Store • 49