Ross AMA-8511, User Manual

Page: 16 / 32

2-4
•
Installation and Setup AMA-8511 User Manual (Iss. 03)
Cable Connections
This section provides instructions for connecting cables to the AMA-8511 when mounted in RossGear
8000 series Digital Products Frames.
Connect the input and output cables according to the frame rear panel connections diagram in the
following figure and discussions. The inputs are internally terminated in 75 ohms. It is not necessary
to terminate unused outputs.
Figure 3. AMA-8511 BNC and Audio Plug Designations for RossGear DFR-8110A (2RU Frame)
AES Input
The AES audio input should be connected to the “IN” BNC on the rear of the frame.
Note If the AES input signal is disrupted, the AMA-8511 will
generate invalid analog audio output.
AES Output
Four reclocked AES outputs are available on BNC connectors 1, 2, 3, and 4.